The Odin Mk3 is a completely redesigned version of the very popular Odin kit, utilizing the latest drive unit technologies from the Excel product line. This kit uses two W18E001 woofers and a single T25CF002 "MILLENNIUM" tweeter mounted in a D'Appolito configuration.

The cabinet is a bass reflex design with the vent placed in the rear. This directs any potential vent noises away from the listener, and allows for minimum baffle area in the front. The pvc port tube is supported by an internal baffle which helps maintain equal air flow on each end of the tube, and also serves as additional cabinet bracing. The port tuning frequency is 31Hz.


The crossover network is conventional except for a parallel circuit which supresses the response peak due to the magnesium cone. The crossover frequency is 2.5kHz.

The Odin Mk3 was designed by Dr. Joseph D'Appolito, and was developed as a companion kit to the Thor transmission line system.

He offers the following comments regarding the performance of the Odin MK3:

"The vented box is tuned about 15% lower than the ubiquitous QB3 alignment to yield a better damped bass response. Several hundred hours of laboratory testing and listening have gone into this system. You literally can't tell where the woofers leave off and the tweeter begins."

Printable PDF files:
Cabinet drawings
Cabinet drawings in inches
Crossover schematics

**IEC 268-5 SEAS reserves the right to change technical data


歡迎致電:+86 20 3439 0041 提出您的問題,我們將竭誠為您提供服務,感謝您對傲士音響的支持與配合!

时时五星计划软件安卓版 千炮捕鱼电玩城街机 大庆冠通手游二人麻将 手机玩游戏赚钱平台曝光 陕西11选5遗漏走势 69游戏中心69棋牌游戏大厅 陕西快乐十分 手机上福彩3D赚钱是真的吗 七星彩南国论坛 河北11选5 足彩总进球高手心得分享 炸鸡叉骨怎么做赚钱 北京赛车 安徽25选5五位走势图 大鱼号怎么赚钱的 江苏11选5 黑龙江11选5开奖结果代购网